Gather Co.

Gather Co Texture Guide

Here at Gather Co we want to ensure that the gap between your screen and our surfaces is bridged. As such, we have developed this Texture Guide to provide a general understanding of the finishes across our collection and to offer a sense of the ‘feel’ you can expect from each variety.

*Please note: This is intended as a guide only. Some surfaces may sit outside the prescribed finish as stated below. It is not a Slip Rating, you’ll find that in the “Resources and Installation” section at the bottom of each product page.

Smooth

Mild

Coarse

Rating

Type of Finish

Polished A mirror-like shine accomplished by using progressively finer grit during the polishing process.

Brushed Brush finishing involves exposing stone surfaces to a rotating wire brush, simulating natural wear over time.

Honed A honed finish is achieved by applying a polishing head with a coarse grit fitting.

Sawn After initial cutting, the stone is lightly polished to remove the heaviest saw marks but, not enough to achieve a fully honed finish.

Acid Washed Acid washing is an exfoliation process where a chemical reaction is used to flake away at the stone’s surface.

Flamed A flamed finish is achieved through heating the surface of stone to extreme temperatures, followed by a rapid cooling process – leaving a textured, unrefined consistency.

Sand Blasted Sand blasting is the process of forcibly propelling streams of course material against a stone surface to smoothen or roughen it.

Chisseled A chiselled finish is achieved when metal combs are run over stone to form a unified grooved surface.

Natural A natural finish refers to stone in its raw state. It is reached through a combination of various geological conditions and prolonged environmental/atmospheric exposure.

1,2,3,4

Tumbled Tumbling is a secondary process applied in addition to one of the primary finishes. It is used to alter the edge detail of stone and typically results in reduced surface coarseness. Most commonly, tumbling is achieved by combining both stone pieces and aggregate inside a rotating rubber lined.

Bush Hammered This process employs either simple hand-held hammers or large electric implements. The method works through repeated surface impacts with a large metal slug made up of uniformed conical points.

Convict Picked A traditional stone treatment historically undertaken by convicts in Australia where steel crafting tools are repeatedly struck against the stone surface to achieve a moderate to heavily textured finish.

Split Splitting is achieved by mechanically or hand fragmenting stone, exposing a natural cleft and heavily textured finish.

Gather Co Rating Guide

Gather Co specialises in trading repurposed and antique fixtures. The matured nature of these genuine artifacts means that every piece comes in a distinct condition. We’ve developed this rating guide to help you quickly assess the level of wear associated with each selection.

Low

Good

High

Rating

One Star

These pieces are beautiful although their application must be carefully considered. Structural integrity is compromised.

Two Star

Likely presence of both structural faults and obvious superficial blemishes. Repairs evident.

Three Star

Minor structural issues and/or noticeable levels of wear.

Four Star

Firm structural integrity. Moderate signs of wear.

Five Star

Signs of wear still evident but, well preserved. Structurally sound.

Image Pack

#GATHERCOGOODS

@GATHERCOAUSTRALIA

TALU

Travertine

Step 1. Format: Stone Bricks

Pavers & Tiles
Subway Tiles
Stone Bricks

Finish: Talu - Unfilled & Honed

Texture Guide: 3

Indicates a low lead time item.

Request Custom Size

A testament to durability, Talu is a Turkish travertine that’s stood the test of time. Due partly to its hardiness and certainly for its broad aesthetic appeal, a mirage of storm clouds is resembled across the surface of every piece.

Ideal for harsh Australian conditions, this remarkable stone is ready to dress any indoor or outdoor area in style.

• Please note that this product has significant colour variation

• Features cloud-like patterning and exudes style

• Ideal for outdoor use around pools

• Highly durable and weather resistant

• Proven to withstand the toughest of Australian conditions

Turkeys spectacular Pamukkale, meaning "Cotton Castle" is a naturally occurring set of travertine pools. They are formed through the accumulation of minerals, brought to the surface by rising volcanic water streams.

Request SAMPLES

for your projects

Add Sample

More Information

Origin

Denizli - is an industrial city in Turkey’s bustling Southwest that is popular with visitors for its surrounding thermal springs. With significant nearby ruins dating back to classical Greek civilisation, it is a cultural gem in Turkey’s outstanding Aegean region.

Material

Travertine - is a kind of limestone formed by the accumulation of minerals in natural ground water deposits. Its composition is often fibrous or calcareous in appearance with white, tan and cream-coloured tones making up the majority of common varieties.

Resources & Installation

Flooring Download

Your pallet.

Gather Co Texture Guide

Gather Co Rating Guide