Your pallet.

Your cart is empty

Subtotal, AUD

0.00 $

Safe and Easy Payments

Payments by Stripe
Payments by Polypay

Gather Co Texture Guide

Here at Gather Co we want to ensure that the gap between your screen and our surfaces is bridged. As such, we have developed this Texture Guide to provide a general understanding of the finishes across our collection and to offer a sense of the ‘feel’ you can expect from each variety.

*Please note: This is intended as a guide only. Some surfaces may sit outside the prescribed finish as stated below. It is not a Slip Rating, you’ll find that in the “Resources and Installation” section at the bottom of each product page.

Smooth
Mild
Coarse
1
2
3
4
5
Rating
Type of Finish
1
Polished A mirror-like shine accomplished by using progressively finer grit during the polishing process.
2
Brushed Brush finishing involves exposing stone surfaces to a rotating wire brush, simulating natural wear over time.
2
Honed A honed finish is achieved by applying a polishing head with a coarse grit fitting.
2
Sawn After initial cutting, the stone is lightly polished to remove the heaviest saw marks but, not enough to achieve a fully honed finish.
3
Acid Washed Acid washing is an exfoliation process where a chemical reaction is used to flake away at the stone’s surface.
3
Flamed A flamed finish is achieved through heating the surface of stone to extreme temperatures, followed by a rapid cooling process – leaving a textured, unrefined consistency.
3
Sand Blasted Sand blasting is the process of forcibly propelling streams of course material against a stone surface to smoothen or roughen it.
4
Chisseled A chiselled finish is achieved when metal combs are run over stone to form a unified grooved surface.
4
Natural A natural finish refers to stone in its raw state. It is reached through a combination of various geological conditions and prolonged environmental/atmospheric exposure.
1,2,3,4
Tumbled Tumbling is a secondary process applied in addition to one of the primary finishes. It is used to alter the edge detail of stone and typically results in reduced surface coarseness. Most commonly, tumbling is achieved by combining both stone pieces and aggregate inside a rotating rubber lined.
5
Bush Hammered This process employs either simple hand-held hammers or large electric implements. The method works through repeated surface impacts with a large metal slug made up of uniformed conical points.
5
Convict Picked A traditional stone treatment historically undertaken by convicts in Australia where steel crafting tools are repeatedly struck against the stone surface to achieve a moderate to heavily textured finish.
5
Split Splitting is achieved by mechanically or hand fragmenting stone, exposing a natural cleft and heavily textured finish.

Gather Co Rating Guide

Gather Co specialises in trading repurposed and antique fixtures. The matured nature of these genuine artifacts means that every piece comes in a distinct condition. We’ve developed this rating guide to help you quickly assess the level of wear associated with each selection.

Low
Good
High
Rating
One Star
These pieces are beautiful although their application must be carefully considered. Structural integrity is compromised.
Two Star
Likely presence of both structural faults and obvious superficial blemishes. Repairs evident.
Three Star
Minor structural issues and/or noticeable levels of wear.
Four Star
Firm structural integrity. Moderate signs of wear.
Five Star
Signs of wear still evident but, well preserved. Structurally sound.

Hey! You may also need these accessories

Natural Lay Walling Corners
FLAMENCO
Straight Edge Walling Corners
FLAMENCO

Image Pack

Design Pack

Image Pack

Design Pack
tag
Gather Co. - FLAMENCO
Gather Co. - FLAMENCO Gather Co. - FLAMENCO Gather Co. - FLAMENCO

#GATHERCOGOODS

@GATHERCOAUSTRALIA

FLAMENCO

Slate 

Step 1. Format: Straight Edge Walling
  • Straight Edge Walling
  • Natural Lay Walling

Finish: Flamenco - Natural

Texture Guide: 4

Request Custom Size
$5.00 each
Add Sample

Lead Time: 8-10 Weeks

This time frame is a guide only and subject to change.
More Information
This product has accessories.

Similarly unique in appearance as it is to the Australian market, Gather Co is proud to boast Flamenco Slate within it's collection. Swirling browns, greys and a prominent purple offer an ageless contemporary feel. 

Elegant and alluring, this stone will add the touch of sophistication in either Natural Lay or Straight Edge Walling formats.


• Coarse slate sourced from the Fujian province in China

• Low water absorption makes it ideal for outdoor feature walls

• Unique colour tones rarely found in Australia

• Suited for use indoors and outdoors


Gather Co.
Gather Co.

"Remaining true to its natural form, Flamenco Slate is unique and stunningly beautiful”

Request SAMPLES

for your projects

Add Sample

More Information

Origin

Fujian - One of the most culturally and linguistically diverse regions of China, Fujian was up until recently one of the most isolated due to its mountainous terrain. Well known for its production of Chinese tea it is also a direct link to Taiwan which sits just 180 kilometres away across the Taiwan strait. 

Material

Slate - is a fine-grained compressed metamorphic rock derived through sedimentary clay and volcanic ash. With extremely workable properties, it has seen application to human structures for centuries. It’s relevance to modern day architecture still stands strong today. 

Resources & Installation

Tips for Installation - Walling Download

You may also need these product accessories

Recently Viewed

Slate 

FLAMENCO